product
Hazet 179NXL-63 Tool trolley flat and 3 big drawers Write Your Review

Tool trolley

∙ Drawers shallow: 3 x 77 x 696 x 398 mm ∙ Drawers tall: 3 x 162 x 696 x 398 mm
  • 179NXL-6

Product information

Application:
For efficient, mobile tool organisation

  • Tool trolley
  • 3 flat and 3 big drawers

Worktops

  • Much bigger storage and work area in stainless steel or plastic, depending on trolley variant up to 30%
  • Fully sealed work surface protects inside of trolley from leaking liquids
  • Interfaces integrated in the worktop for accessories such as laptop holder and top module
  • With stainless steel work surface
  • Extra protection through high-quality plastic end caps

Body / Pull-handle

  • Extremely robust design thanks to dual-wall structure
  • Complete welded construction of the entire body for tough daily workshop use
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Ergonomically optimised pull handle for better manoeuvrability
  • Brushed stainless steel handle

Locking concept

  • Ergonomically arranged side lock position for better operability protects keys and lock against damage
  • Highly secure closing system with central locking technology for optimum protection of your property
  • Two-stage locking concept
    - Central locking, lockable with cylinder lock with 2 folding keys
    - Mutual drawer locking for minimum tilting risk

Drawer concept

  • Self-closing and reciprocal locking of the drawers prevents unwanted opening
  • 100% sliding-out with ball-bearing telescopic rails
  • Drawer design for optimum use of the interior
  • New drawer fronts for optimised handling
  • New dirt-insensitive drawer coating for easy cleaning
  • Flat drawer, height: 76.5 mm / big, height: 161.5 m
  • 40 kg loading capacity per drawer
  • Drawer size for order system 4/3+

High performance chassis

  • Large wheels with high loading capacity (∅ 125 mm) with precision ball-bearing and dual ball race in the swivel bearing, easy manoeuvrability even under high dynamic load
  • 2 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swivelling, e.g. on inclined surfaces
  • Protective ring prevents dirt and threads from getting in
  • Grey non-marking elastic tyres enable smooth movement
  • Loading capacity (static): 1000 kg
  • Loading capacity per drawer: 40 kg
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 959 mm
  • Height: 1020 mm
  • Width: 518 mm
  • Net weight: 125 kg
  • Drawers shallow: 3 x 77 x 696 x 398 mm
  • Drawers tall: 3 x 162 x 696 x 398 mm
  • Drawer size for order system: 4/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)

Price : by Request

product
Hazet 179N-6 Tool trolley For efficient Write Your Review

Tool trolley i

∙ Drawers shallow: 3 x 77 x 522 x 398 mm ∙ Drawers tall: 3 x 162 x 522 x 398 mm
  • 179N-6

Product information

Application:
For efficient, mobile tool organisation

  • Tool trolley
  • 3 flat and 3 big drawers

Worktops

  • Much bigger storage and work area in stainless steel or plastic, depending on trolley variant up to 30%
  • Fully sealed work surface protects inside of trolley from leaking liquids
  • Interfaces integrated in the worktop for accessories such as laptop holder and top module

Body / Pull-handle

  • Extremely robust design thanks to dual-wall structure
  • Complete welded construction of the entire body for tough daily workshop use
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Ergonomically optimised pull handle for better manoeuvrability

Locking concept

  • Ergonomically arranged side lock position for better operability protects keys and lock against damage
  • Highly secure closing system with central locking technology for optimum protection of your property
  • Two-stage locking concept
    - Central locking, lockable with cylinder lock with 2 folding keys
    - Mutual drawer locking for minimum tilting risk

Drawer concept

  • Self-closing and reciprocal locking of the drawers prevents unwanted opening
  • 100% sliding-out with ball-bearing telescopic rails
  • Drawer design for optimum use of the interior
  • New drawer fronts for optimised handling
  • New dirt-insensitive drawer coating for easy cleaning
  • Flat drawer, height: 76.5 mm / big, height: 161.5 m
  • 25 kg loading capacity per drawer
  • Drawer size for order system 3/3+

High performance chassis

  • Large wheels with high loading capacity (∅ 125 mm) with precision ball-bearing and dual ball race in the swivel bearing, easy manoeuvrability even under high dynamic load
  • 2 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swivelling, e.g. on inclined surfaces
  • Protective ring prevents dirt and threads from getting in
  • Grey non-marking elastic tyres enable smooth movement

i 179 N-6 – 9:

  • With solvent resistant plastic work surface
  • Metal handle, powder coated in black

i 179 N X-6 – 8:

  • With stainless steel work surface
  • Extra protection through high-quality plastic end caps
  • Brushed stainless steel handle
  • Loading capacity (static): 540 kg
  • Loading capacity per drawer: 25 kg
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 785 mm
  • Height: 1020 mm
  • Width: 518 mm
  • Net weight: 90 kg
  • Drawers shallow: 3 x 77 x 522 x 398 mm
  • Drawers tall: 3 x 162 x 522 x 398 mm
  • Drawer size for order system: 3/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)

Price : by Request

product
Hazet 179NXXL-7 Tool trolley For efficient Write Your Review

Tool trolley i

∙ Drawers shallow: 5 x 77 x 870 x 398 mm ∙ Drawers tall: 2 x 162 x 870 x 398 mm
  • 179NXXL-7

Product information

Application:
For efficient, mobile tool organisation

  • Tool trolley
  • 5 flat and 2 big drawers

Worktops

  • Much bigger storage and work area in stainless steel or plastic, depending on trolley variant up to 30%
  • Fully sealed work surface protects inside of trolley from leaking liquids
  • Interfaces integrated in the worktop for accessories such as laptop holder and top module
  • With stainless steel work surface
  • Extra protection through high-quality plastic end caps

Body / Pull-handle

  • Extremely robust design thanks to dual-wall structure
  • Complete welded construction of the entire body for tough daily workshop use
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Ergonomically optimised pull handle for better manoeuvrability
  • Brushed stainless steel handle

Locking concept

  • Ergonomically arranged side lock position for better operability protects keys and lock against damage
  • Highly secure closing system with central locking technology for optimum protection of your property
  • Two-stage locking concept
    - Central locking, lockable with cylinder lock with 2 folding keys
    - Mutual drawer locking for minimum tilting risk

Drawer concept

  • Self-closing and reciprocal locking of the drawers prevents unwanted opening
  • 100% sliding-out with ball-bearing telescopic rails
  • Drawer design for optimum use of the interior
  • New drawer fronts for optimised handling
  • New dirt-insensitive drawer coating for easy cleaning
  • Flat drawer, height: 76.5 mm / big, height: 161.5 m
  • 40 kg loading capacity per drawer
  • Drawer size for order system 5/3+

High performance chassis

  • Large wheels with high loading capacity (∅ 125 mm) with precision ball-bearing and dual ball race in the swivel bearing, easy manoeuvrability even under high dynamic load
  • 2 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swivelling, e.g. on inclined surfaces
  • Protective ring prevents dirt and threads from getting in
  • Grey non-marking elastic tyres enable smooth movement
  • Loading capacity (static): 1000 kg
  • Loading capacity per drawer: 40 kg
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 1133 mm
  • Height: 1020 mm
  • Width: 518 mm
  • Net weight: 145 kg
  • Drawers shallow: 5 x 77 x 870 x 398 mm
  • Drawers tall: 2 x 162 x 870 x 398 mm
  • Drawer size for order system: 5/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)

Price : by Request

product
Hazet 179NXL-7/265 Tool trolley Write Your Review

Tool trolley

∙ Drawers shallow: 5 x 77 x 696 x 398 mm ∙ Drawers tall: 2 x 162 x 696 x 398 mm ∙ Number of tools: 265
  • 179NXL-7/265

Product information

Application:
For efficient, mobile tool organisation

  • Tool trolley
  • 5 flat and 2 high drawers
  • Complete with 265-piece tool assortment in Safety-Insert-System soft foam insert

Worktops

  • Much bigger storage and work area in stainless steel or plastic, depending on trolley variant up to 30%
  • Fully sealed work surface protects inside of trolley from leaking liquids
  • Interfaces integrated in the worktop for accessories such as laptop holder and top module
  • With stainless steel work surface
  • Extra protection through high-quality plastic end caps

Body / Pull-handle

  • Extremely robust design thanks to dual-wall structure
  • Complete welded construction of the entire body for tough daily workshop use
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Ergonomically optimised pull handle for better manoeuvrability
  • Brushed stainless steel handle

Locking concept

  • Ergonomically arranged side lock position for better operability protects keys and lock against damage
  • Highly secure closing system with central locking technology for optimum protection of your property
  • Two-stage locking concept
    - Central locking, lockable with cylinder lock with 2 folding keys
    - Mutual drawer locking for minimum tilting risk

Drawer concept

  • Self-closing and reciprocal locking of the drawers prevents unwanted opening
  • 100% sliding-out with ball-bearing telescopic rails
  • Drawer design for optimum use of the interior
  • New drawer fronts for optimised handling
  • New dirt-insensitive drawer coating for easy cleaning
  • Flat drawer, height: 76.5 mm / big, height: 161.5 m
  • 40 kg loading capacity per drawer
  • Drawer size for order system 4/3+

High performance chassis

  • Large wheels with high loading capacity (∅ 125 mm) with precision ball-bearing and dual ball race in the swivel bearing, easy manoeuvrability even under high dynamic load
  • 2 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swivelling, e.g. on inclined surfaces
  • Protective ring prevents dirt and threads from getting in
  • Grey non-marking elastic tyres enable smooth movement
  • Loading capacity (static): 1000 kg
  • Loading capacity per drawer: 40 kg
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 959 mm
  • Height: 1020 mm
  • Width: 518 mm
  • Net weight: 125 kg
  • Drawers shallow: 5 x 77 x 696 x 398 mm
  • Drawers tall: 2 x 162 x 696 x 398 mm
  • Drawer size for order system: 4/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)
  • Number of tools: 265

Price : by Request

product
Hazet 179N-7/137 Tool trolley 137-piece tool Write Your Review

Tool trolley i

∙ Drawers shallow: 5 x 77 x 522 x 398 mm ∙ Drawers tall: 2 x 162 x 522 x 398 mm
  • 179N-7/137

Product information

Application:
For efficient, mobile tool organisation

  • Tool trolley
  • 5 flat and 2 high drawers
  • Complete with 137-piece tool assortment in Safety-Insert-System soft foam insert

Worktops

  • Much bigger storage and work area in stainless steel or plastic, depending on trolley variant up to 30%
  • Fully sealed work surface protects inside of trolley from leaking liquids
  • Interfaces integrated in the worktop for accessories such as laptop holder and top module

Body / Pull-handle

  • Extremely robust design thanks to dual-wall structure
  • Complete welded construction of the entire body for tough daily workshop use
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Ergonomically optimised pull handle for better manoeuvrability

Locking concept

  • Ergonomically arranged side lock position for better operability protects keys and lock against damage
  • Highly secure closing system with central locking technology for optimum protection of your property
  • Two-stage locking concept
    - Central locking, lockable with cylinder lock with 2 folding keys
    - Mutual drawer locking for minimum tilting risk

Drawer concept

  • Self-closing and reciprocal locking of the drawers prevents unwanted opening
  • 100% sliding-out with ball-bearing telescopic rails
  • Drawer design for optimum use of the interior
  • New drawer fronts for optimised handling
  • New dirt-insensitive drawer coating for easy cleaning
  • Flat drawer, height: 76.5 mm / big, height: 161.5 m
  • 25 kg loading capacity per drawer
  • Drawer size for order system 3/3+

High performance chassis

  • Large wheels with high loading capacity (∅ 125 mm) with precision ball-bearing and dual ball race in the swivel bearing, easy manoeuvrability even under high dynamic load
  • 2 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swivelling, e.g. on inclined surfaces
  • Protective ring prevents dirt and threads from getting in
  • Grey non-marking elastic tyres enable smooth movement

i 179 N-6 – 9:

  • With solvent resistant plastic work surface
  • Metal handle, powder coated in black

i 179 N X-6 – 8:

  • With stainless steel work surface
  • Extra protection through high-quality plastic end caps
  • Brushed stainless steel handle
  • Loading capacity (static): 540 kg
  • Loading capacity per drawer: 25 kg
  • Colour: HAZET-BLUE
  • Total length: 785 mm
  • Height: 1020 mm
  • Width: 518 mm
  • Net weight: 90 kg
  • Drawers shallow: 5 x 77 x 522 x 398 mm
  • Drawers tall: 2 x 162 x 522 x 398 mm
  • Drawer size for order system: 3/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)

Price : by Request

product
Hazet 179NX-6 Tool trolley Loading capacity 540 kg Write Your Review

Tool trolley i

∙ Drawers shallow: 3 x 77 x 522 x 398 mm ∙ Drawers tall: 3 x 162 x 522 x 398 mm
  • 179NX-6

Product information

Application:
For efficient, mobile tool organisation

  • Tool trolley
  • 3 flat and 3 big drawers

Worktops

  • Much bigger storage and work area in stainless steel or plastic, depending on trolley variant up to 30%
  • Fully sealed work surface protects inside of trolley from leaking liquids
  • Interfaces integrated in the worktop for accessories such as laptop holder and top module

Body / Pull-handle

  • Extremely robust design thanks to dual-wall structure
  • Complete welded construction of the entire body for tough daily workshop use
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Ergonomically optimised pull handle for better manoeuvrability

Locking concept

  • Ergonomically arranged side lock position for better operability protects keys and lock against damage
  • Highly secure closing system with central locking technology for optimum protection of your property
  • Two-stage locking concept
    - Central locking, lockable with cylinder lock with 2 folding keys
    - Mutual drawer locking for minimum tilting risk

Drawer concept

  • Self-closing and reciprocal locking of the drawers prevents unwanted opening
  • 100% sliding-out with ball-bearing telescopic rails
  • Drawer design for optimum use of the interior
  • New drawer fronts for optimised handling
  • New dirt-insensitive drawer coating for easy cleaning
  • Flat drawer, height: 76.5 mm / big, height: 161.5 m
  • 25 kg loading capacity per drawer
  • Drawer size for order system 3/3+

High performance chassis

  • Large wheels with high loading capacity (∅ 125 mm) with precision ball-bearing and dual ball race in the swivel bearing, easy manoeuvrability even under high dynamic load
  • 2 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swivelling, e.g. on inclined surfaces
  • Protective ring prevents dirt and threads from getting in
  • Grey non-marking elastic tyres enable smooth movement

i 179 N-6 – 9:

  • With solvent resistant plastic work surface
  • Metal handle, powder coated in black

i 179 N X-6 – 8:

  • With stainless steel work surface
  • Extra protection through high-quality plastic end caps
  • Brushed stainless steel handle
  • Loading capacity (static): 540 kg
  • Loading capacity per drawer: 25 kg
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 786 mm
  • Height: 1020 mm
  • Width: 518 mm
  • Net weight: 90 kg
  • Drawers shallow: 3 x 77 x 522 x 398 mm
  • Drawers tall: 3 x 162 x 522 x 398 mm
  • Drawer size for order system: 3/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)

Price : by Request

product
Hazet 9213-1000/3 Cordless impact wrench Write Your Review

Hazet 9213-1000/3 Cordless impact wrench

∙ Maximum loosening torque: 1400 Nm ∙ Square, solid 20 mm (3/4 inch) ∙ Number of tools: 3
  • 9213-1000/3

Product information

Application:
Work independently

  • High efficiency thanks to brushless motor
  • 3-piece set, contents:
    cordless impact wrench, battery charger, Li-ion battery (1x)

18 V, 5 Ah

  • Suitable for continuous operation
  • Robust machine housing
  • Three selectable performance levels for torque screw tightening
    1. Level: approx. 180 Nm at 0-400 rpm
    2. Level: approx. 400 Nm at 0-800 rpm
    3. Level: approx. 1000 Nm at 0-1800 rpm
  • With illumination of the work area before the output begins to move
  • Li-ion battery with very low self-discharge (only 2%) compared to a standard NiMH battery (15 - 25%)
  • Replacement battery: 9212-05
  • Battery net weight: 0.659 kg
  • Battery charger net weight: 0.66 kg
  • Case net weight: 2.15 kg
  • Dimensions incl. battery: 278 x 230 x 89.5 mm
  • Including belt clip, attachable on both sides
  • Brushless DC motor (BLDC)
    - Longer lifetime, less wear, no change of the carbon brushes required
    - Greater efficiency and thus less battery consumption
    - More compact motor allows for smaller installation dimensions
  • Charging time with 5 Ah battery approx. 80 min
  • Sound power level: 112 db(A) Lp W
  • Vibration acceleration: 17.80 m/s2
  • Screw size M: 24
  • Forward and reverse: multi-stage (right/left)
  • Plastic box
  • Total length: 233 mm
  • Height: 278 mm
  • Width: 89.5 mm
  • Output: Square, solid 20 mm (3/4 inch)
  • Net weight: 3.7 kg
  • Tightening torque max.: 1000 Nm
  • Maximum loosening torque: 1400 Nm
  • Sound pressure level: 101 dB(A) Lp A
  • Revolutions per minute: 0 – 1800

Do you know – Li-Ion batteries:

  • Do not have any memory effect
  • Consist of cells with 3.6 V each
  • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
    Attention: For a longer lifetime of the battery please store it charged up to 50 to 80% only
  • Have an energy density which is twice as high as nickel cadmium batteries, for example
  • Have a nominal voltage three times higher than a nickel metal hydride battery
  • Require multiple complete charging cycles to reach full capacity
  • Number of tools: 3

Price : by Request

product
Hazet 9212-1000 Cordless impact wrench Write Your Review

Cordless impact wrench

∙ Maximum loosening torque: 1400 Nm ∙ Square, solid 12.5 mm (1/2 inch)
  • 9212-1000

Product information

Application:
Work independently

  • High efficiency thanks to brushless motor
  • Basic unit cordless impact wrench, without battery

18 V, 5 Ah

  • Suitable for continuous operation
  • Robust machine housing
  • Three selectable performance levels for torque screw tightening
    1. Level: approx. 180 Nm at 0-400 rpm
    2. Level: approx. 400 Nm at 0-800 rpm
    3. Level: approx. 1000 Nm at 0-1800 rpm
  • With illumination of the work area before the output begins to move
  • Li-ion battery with very low self-discharge (only 2%) compared to a standard NiMH battery (15 - 25%)
  • Replacement battery: 9212-05
  • Battery net weight: 0.659 kg
  • Battery charger net weight: 0.66 kg
  • Case net weight: 2.15 kg
  • Dimensions incl. battery: 278 x 230 x 89.5 mm
  • Including belt clip, attachable on both sides
  • Brushless DC motor (BLDC)
    - Longer lifetime, less wear, no change of the carbon brushes required
    - Greater efficiency and thus less battery consumption
    - More compact motor allows for smaller installation dimensions
  • Charging time with 5 Ah battery approx. 80 min
  • Sound power level: 112 db(A) Lp W
  • Vibration acceleration: 17.80 m/s2
  • Screw size M: 24
  • Forward and reverse: multi-stage (right/left)
  • Total length: 233 mm
  • Height: 278 mm
  • Width: 89.5 mm
  • Output: Square, solid 12.5 mm (1/2 inch)
  • Net weight: 3.64 kg
  • Tightening torque max.: 1000 Nm
  • Maximum loosening torque: 1400 Nm
  • Sound pressure level: 101 dB(A) Lp A
  • Revolutions per minute: 0 – 1800

Do you know – Li-Ion batteries:

  • Do not have any memory effect
  • Consist of cells with 3.6 V each
  • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
    Attention: For a longer lifetime of the battery please store it charged up to 50 to 80% only
  • Have an energy density which is twice as high as nickel cadmium batteries, for example
  • Have a nominal voltage three times higher than a nickel metal hydride battery
  • Require multiple complete charging cycles to reach full capacity

Price : by Request

product
Hazet 9230-2 Cordless drilling machine set Write Your Review

Hazet 9230-2 Cordless drilling machine set


Product information

  • High efficiency thanks to brushless motor
  • 3-piece set
    1 cordless drilling machine
    1 quick charger (40 minutes)
    1 Li-ion rechargeable battery 18 V, 2 Ah
  • In plastic case
  • 18 V, 2 Ah
  • Compatible with HAZET rechargeable batteries 9212-02 and 9212-05
  • Tool-free metal quick-clamping drill chuck 1-13 mm
  • Selectable torque stages 15 + 1 drilling
  • Revolutions per minute Step 1: 0–560
    Revolutions per minute Step 2: 0–1900
  • Vibration acceleration screwing: 0.8 m/s2
    Vibration acceleration drilling: 2.3 m/s2
  • Robust machine housing
  • Suitable for continuous operation
  • Including belt clip, attachable on both sides
  • Weight with battery: 1.68 kg
    Weight without rechargeable battery: 1.27 kg
  • Brushless DC motor (BLDC):
    - Longer lifetime, less wear, no change of the carbon brushes required
    - Greater efficiency and thus less battery consumption - More compact motor allows for smaller installation dimensions
  • Plastic roll
  • Tightening torque max.: 60 Nm
  • Sound pressure level: 68 dB(A) Lp A

Do you know – Li-Ion batteries:

  • Do not have any memory effect
  • Consist of cells with 3.6 V each
  • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
    Attention: For a longer lifetime of the battery please store it charged up to 50 to 80% only
  • Have an energy density which is twice as high as nickel cadmium batteries, for example
  • Have a nominal voltage three times higher than a nickel metal hydride battery
  • Require multiple complete charging cycles to reach full capacity
  • Number of tools: 3

Price : by Request

product
Hazet 9212-3 Cordless impact wrench High efficiency Write Your Review

Cordless impact wrench

∙ Maximum loosening torque: 700 Nm ∙ Square, solid 12.5 mm (1/2 inch) ∙ Number of tools: 3
  • 9212-3

Product information

Application:
Work independently

  • High efficiency thanks to brushless motor
  • 3-piece set, Contents:
    Cordless impact wrench, battery charger, Li-Ion battery (1x)

18 V, 5 Ah

  • Three selectable performance levels for torque screw tightening
    Level 1: approx. 80 Nm at 600 rpm at ~1700 strokes per minute
    Level 2: approx. 300 Nm at 1400 rpm at ~2500 strokes per minute
    Level 3: approx. 500 Nm at 2000 rpm at ~3400 strokes per minute
  • With illumination of the work area before the output begins to move
  • Li-ion battery with very low self-discharge (only 2%) compared to a standard NiMH battery (15 - 25%)
  • Amperage without load: 5.5 A
  • Replacement battery: 9212-05
  • Net weight: 1.857 kg (without battery pack)
  • Battery net weight: 0.659 kg
  • Battery charger net weight: 0.66 kg
  • Case net weight: 4.352 kg
  • Dimensions incl. battery: 204 x 64 x 259 mm
  • Including belt clip, attachable on both sides
  • Brushless DC motor (BLDC)
    - Longer lifetime, less wear, no change of the carbon brushes required
    - Greater efficiency and thus less battery consumption
    - More compact motor allows for smaller installation dimensions
  • Recommended torque: 500 Nm
  • Sound power level: 110.4 db(A) Lp W
  • Vibration acceleration: 20.30 m/s2
  • Screw size M: 16
  • Forward and reverse: multi-stage (right/left)
  • Plastic box
  • Total length: 204 mm
  • Height: 259 mm
  • Width: 64 mm
  • Output: Square, solid 12.5 mm (1/2 inch)
  • Net weight: 1.86 kg
  • Tightening torque max.: 500 Nm
  • Maximum loosening torque: 700 Nm
  • Sound pressure level: 99.4 dB(A) Lp A
  • Revolutions per minute: 0 – 2000

Do you know – Li-Ion batteries:

  • Do not have any memory effect
  • Consist of cells with 3.6 V each
  • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
    Attention: For a longer lifetime of the battery please store it charged up to 50 to 80% only
  • Have an energy density which is twice as high as nickel cadmium batteries, for example
  • Have a nominal voltage three times higher than a nickel metal hydride battery
  • Require multiple complete charging cycles to reach full capacity
  • Number of tools: 3

Price : by Request

product
Hazet 179NW-7/230 Mobile work bench Write Your Review

Mobile work bench

∙ Drawers shallow: 6 x 76 x 522 x 398 mm ∙ Drawers tall: 1 x 161 x 522 x 398 mm ∙ Number of tools: 230
  • 179NW-7/230

Product information

  • More storage space than preceding model
  • 6 x flat drawers and 1 x high heavy-duty drawer
  • Lockable storage compartment with 2 storage surfaces
  • Complete with 230-piece tool assortment in Safety-Insert-System soft foam insert
  • Holz-Multiplex-Birke Arbeitsfläche, auswechselbar
  • Inklusive 9-fach verstellbarem Zwischenboden und fest montierter Tür
  • Cable duct on rear panel allows battery devices to be charged when the door is closed, for instance
  • Complete welded construction of the entire body for tough daily workshop use
  • Heavy duty drawer: 40 kg
  • Additional rectangular perforation for tool holder, e.g. HAZET 112-230
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Flexible vice assembly (front, right, left) e.g. HAZET 2175 N according to drilling template specification
  • Chassis:
    - Large wheels with high loading capacity (∅ 125 mm) with precision ball bearings and dual ball race in the swivel bearing, easy movement even at high dynamic load
    - 2 swivel castors with double stop: braked roller prevents rolling away,
    braked swivel bearing prevents the swivel castors from rotating, e.g. on inclined surfaces
    - protective ring keeps dirt and threads away
    - Grey non-marking elastic rollers allow smooth running
  • Locking concept:
    - Mutual drawer locking for minimal risk of tipping over
    - Central lock (central locking and cylinder lock) simultaneously locks door and drawers
    - Only one key left for simultaneous locking of door and drawers (Scope of delivery: 2 keys)
    - 180° rotation, prevents the key from breaking off
    - 100% sliding-out by means of ball-bearing telescopic rails – self closing
  • 1 heavy duty drawer, loading capacity 40 kg, 161 mm high
    6 drawers, loading capacity 25 kg, 76 mm high
    2 work surfaces in the storage compartment, top: 15 kg / bottom: 35 kg
  • Loading capacity (static): 750 kg
  • Worktop: Wood multiplex birch, replaceable
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 1150 mm
  • Height: 965 mm
  • Width: 600 mm
  • Net weight: 120 kg
  • Drawers shallow: 6 x 76 x 522 x 398 mm
  • Drawers tall: 1 x 161 x 522 x 398 mm
  • Drawer size for order system: 3/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)
  • Number of tools: 230

Price : by Request

product
Hazet 179NW-7 Mobile work bench More storage Write Your Review

Mobile work bench

∙ Drawers shallow: 6 x 76 x 522 x 398 mm ∙ Drawers tall: 1 x 161 x 522 x 398 mm
  • 179NW-7

Product information

  • More storage space than preceding model
  • 6 x flat drawers and 1 x high heavy-duty drawer
  • Lockable storage compartment with 2 storage surfaces
  • Holz-Multiplex-Birke Arbeitsfläche, auswechselbar
  • Inklusive 9-fach verstellbarem Zwischenboden und fest montierter Tür
  • Cable duct on rear panel allows battery devices to be charged when the door is closed, for instance
  • Complete welded construction of the entire body for tough daily workshop use
  • Heavy duty drawer: 40 kg
  • Additional rectangular perforation for tool holder, e.g. HAZET 112-230
  • Optimised, yielding edge protection on all four corners with real impact protection thanks to internal damping concept
  • Flexible vice assembly (front, right, left) e.g. HAZET 2175 N according to drilling template specification
  • Chassis:
    - Large wheels with high loading capacity (∅ 125 mm) with precision ball bearings and dual ball race in the swivel bearing, easy movement even at high dynamic load
    - 2 swivel castors with double stop: braked roller prevents rolling away,
    braked swivel bearing prevents the swivel castors from rotating, e.g. on inclined surfaces
    - protective ring keeps dirt and threads away
    - Grey non-marking elastic rollers allow smooth running
  • Locking concept:
    - Mutual drawer locking for minimal risk of tipping over
    - Central lock (central locking and cylinder lock) simultaneously locks door and drawers
    - Only one key left for simultaneous locking of door and drawers (Scope of delivery: 2 keys)
    - 180° rotation, prevents the key from breaking off
    - 100% sliding-out by means of ball-bearing telescopic rails – self closing
  • 1 heavy duty drawer, loading capacity 40 kg, 161 mm high
    6 drawers, loading capacity 25 kg, 76 mm high
    2 work surfaces in the storage compartment, top: 15 kg / bottom: 35 kg
  • Loading capacity (static): 750 kg
  • Worktop: Wood multiplex birch, replaceable
  • Colour: HAZET-BLUE
  • Made in Germany
  • Total length: 1150 mm
  • Height: 965 mm
  • Width: 600 mm
  • Net weight: 120 kg
  • Drawers shallow: 6 x 76 x 522 x 398 mm
  • Drawers tall: 1 x 161 x 522 x 398 mm
  • Drawer size for order system: 3/3+
  • Number of fixed castors: 2 (∅ 125 mm)
  • Number of swivel castors: 2 (∅ 125 mm)

Price : by Request

product
Hazet 167B Mini HAZET 167-3 Including ballpoint pen Write Your Review

HAZET LINE
Your Individual HAZET Premium Gift

All products come in an inlay or velvet pouch (HAZET 853 B) in high-quality black cardboard with an embossed HAZET logo.
Nozzle adjusting tool and jack-knife in practical, re-sealable blister packaging.

The HAZET LINE products have a wide array of optional customisation possibilities above a required minimum quantity of 100 units. The following customisations are possible:

  • Insert as inlay card
  • Sleeve around box
  • Change card in blister packaging
  • Laser engraving or Tampoprint depending on product model
  • Laser engraving on box

Make a present of a unique, high-quality gift, which can be individualised and hence adds a special touch. Particular highlight: delivery in attractive gift packaging made from high-quality black cardboard including embossed HAZET logo with inlay or in a dustproof velvet pouch.

Here's how to get your individual HAZET premium gift

From a quantity of 100 units, we are happy to print or laser engrave your logo onto the gift packaging, the inlay, the blister card or if possible on the tool. Please consult our specialist advisors or promotional material partners to find out the maximum possible size of your logo on the respective tool. We have arranged a multitude of optional customisations for you!

Whether laser engraving, Tampoprint, inserts, sleeves OR blister cards: please contact us at any time – we will be happy to advise you!

How it works:

  • Fulfil the required minimum quantity: 100 units
  • Tell us about your desired tool and any optional customisation wishes
  • You will receive your individually tailored quotation via HAZET or your promotional material partner
  • Place your order with HAZET or your promotional material partner, and provide your logo in a reproducible format (preferably EPS)
  • You will receive a realistic illustration or a sample (invoiced separately)
  • You approve the sample in writing
  • Production and delivery to the desired delivery address

Delivery times ex works:

  • In gift wrapping, without special customisation: approx. 3 weeks after receipt of order
  • With customisation: approx. 6 weeks after receipt of order / 4 weeks after sample approval

Price : by Request